Driving route · Canada

Route from Beaver Lake to Canoe Lake

Interactive map, distance, and indicative drive time for the route from Beaver Lake to Canoe Lake — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Beaver Lake (Alberta) and Canoe Lake (Saskatchewan). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Beaver Lake to Canoe Lake

The straight-line distance between Beaver Lake and Canoe Lake is 232.3 km. The estimated road distance by car is around 262 km, with an indicative drive time of 2 h 55 min.

Straight-line distance 232.3 km
Estimated road distance ~262 km
Indicative drive time 2 h 55 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Beaver Lake – Canoe Lake

Route type Medium

Medium-distance route (100–300 km) — plan a stop and check fuel before departure.

Indicative fuel cost $29–$40

Estimate: ~262 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Beaver Lake to Canoe Lake

The map shows the locations of Beaver Lake (A) and Canoe Lake (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Beaver Lake to Canoe Lake

Real distance: 421.6 km  ·  Estimated time: 5 h 35 min

🗓 Calculated on June 3, 2026
  1. Drive west on Birch Drive. 66 m
  2. Turn right onto Laura's Spruce Drive. 669 m
  3. Turn right onto Range Road 134. 124 m
  4. Turn left onto Highway 663/663. 3.6 km
  5. Turn left onto Northern Woods & Water Route/36/55. Continue on 36/55. 17.8 km
  6. Turn left onto Northern Woods & Water Route/55. Continue on 55. 88.5 km
  7. Turn right onto Buffalo Trail/41. 16.3 km
  8. Turn left onto Secondary Highway 660/660. 5.4 km
  9. Turn left onto Highway 28/28. 33.0 km
  10. Turn right onto Northern Woods & Water Route/55. Continue on 55. 65.5 km
  11. Turn right onto Northern Woods & Water Route/26/55. 1.4 km
  12. Turn left to stay on Northern Woods & Water Route/55. 67.5 km

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Beaver Lake – Canoe Lake

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~262 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Beaver Lake

Alberta · 54.75970, -111.91200

Beaver Lake sits in northern Alberta at roughly 54.76 N, 111.91 W. On provincial maps it appears amid the boreal lake-and-forest zone and serves as a Tier 2 community and waypoint for drivers moving between scattered…

Destination

Canoe Lake

Saskatchewan · 55.09810, -108.32300

Canoe Lake sits in the northern lake country of Saskatchewan, inland from major prairie corridors and set among boreal forest and inland water. On a provincial map it appears as a small community on the shores of Canoe…

How to drive from Beaver Lake to Canoe Lake

The straight-line distance between Beaver Lake (Alberta) and Canoe Lake (Saskatchewan) is about 232.3 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Beaver Lake – Canoe Lake

Looking for directions from Beaver Lake to Canoe Lake? The estimated road distance is 262 km (232.3 km straight line), with an indicative drive time of 2 h 55 min. A medium-distance route (100–300 km) that connects Alberta to Saskatchewan. Plan at least one stop and check fuel before departure. Choose the transport mode in the live planner to get the detailed track.

The trip starts at Beaver Lake (Alberta) — coordinates 54.7597° N, -111.9120° E. The destination is Canoe Lake (Saskatchewan), at 55.0981° N, -108.3230° E.

Practical tips for the Beaver Lake – Canoe Lake drive

Terrain along the way

The route starts in Alberta — a province prairie in the south rising into the Canadian Rockies in the west — and reaches Canoe Lake in Saskatchewan, prairie to the south and boreal forest, lakes, and Shield country to the north.

When to leave

For a medium-distance trip, leaving before 07:00 or after 10:00 helps you avoid urban congestion. Friday afternoons and Sunday returns often slow the major highways.

Alternatives

For this route of about 262 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Canoe Lake

Full information about Canoe Lake: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Canoe Lake.

Canoe Lake profile →

Explore Beaver Lake

Full information about Beaver Lake: map, GPS coordinates, and all routes from Beaver Lake to other Canadian cities.

Beaver Lake profile →

Related tools

Related routes

From Beaver Lake to other cities:

To Canoe Lake from other cities:

All info about Beaver Lake →  ·  All info about Canoe Lake →

Popular routes from Alberta

Most-searched routes from Alberta, ranked by popularity.

All cities of Alberta →

Frequently asked questions: Beaver Lake – Canoe Lake

What is the straight-line distance between Beaver Lake and Canoe Lake?

The straight-line distance between Beaver Lake and Canoe Lake is about 232.3 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Beaver Lake to Canoe Lake?

The estimated road distance from Beaver Lake to Canoe Lake is about 262 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Beaver Lake to Canoe Lake?

Indicative drive time from Beaver Lake to Canoe Lake is about 2 h 55 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Beaver Lake to Canoe Lake?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Beaver Lake–Canoe Lake route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Beaver Lake to Canoe Lake?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Beaver Lake to Canoe Lake?

For alternative routes, use the live planner: pick between highways, secondary roads, and shorter or scenic options.

Can I open the Beaver Lake–Canoe Lake route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Beaver Lake as origin and Canoe Lake as destination.