Driving route · Canada

Route from Beverly to Spring Lake

Interactive map, distance, and indicative drive time for the route from Beverly to Spring Lake — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Beverly (Alberta) and Spring Lake (Alberta). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Beverly to Spring Lake

The straight-line distance between Beverly and Spring Lake is 48.1 km. The estimated road distance by car is around 63 km, with an indicative drive time of 42 min.

Straight-line distance 48.1 km
Estimated road distance ~63 km
Indicative drive time 42 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Beverly – Spring Lake

Route type Short

Short route (under 100 km) — suitable for a day trip. Indicative drive time under 1 h 30 min.

Indicative fuel cost $7–$10

Estimate: ~63 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Beverly to Spring Lake

The map shows the locations of Beverly (A) and Spring Lake (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Beverly to Spring Lake

Real distance: 71.6 km  ·  Estimated time: 1 h 20 min

🗓 Calculated on June 4, 2026
  1. Drive north on 38 Street NW. 12 m
  2. Turn right onto 114 Avenue NW. 413 m
  3. Turn left onto 34 Street NW. 395 m
  4. Turn right onto 118 Avenue NW. 860 m
  5. Turn left to take the 16 East ramp toward Sherwood Park/Lloydminster. 1.8 km
  6. Take exit 400A onto Anthony Henday Drive. 297 m
  7. Keep left to take Anthony Henday Drive. 30.6 km
  8. Take exit 25 onto 16/Yellowhead Trail toward Jasper. 503 m
  9. Keep right to take 16 West toward Jasper. 26.0 km
  10. Turn left onto Rosenthal Road. 3.2 km
  11. Turn right onto Highway 16A/16A/Parkland Highway. 2.6 km
  12. Turn left onto Parkland Drive. 2.4 km

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Beverly – Spring Lake

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~63 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Beverly

Alberta · 53.56670, -113.40000

Beverly sits on the eastern edge of the Edmonton metropolitan area in Alberta. Shown on maps as a built-up neighbourhood along the North Saskatchewan River valley, it functions mainly as a residential and…

Destination

Spring Lake

Alberta · 53.51940, -114.12400

Spring Lake sits in north-central Alberta at approximately 53.5194°N, -114.124°W. On provincial and county maps it appears as a compact, primarily residential and rural community surrounded by farming and open land. For…

How to drive from Beverly to Spring Lake

The straight-line distance between Beverly (Alberta) and Spring Lake (Alberta) is about 48.1 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Beverly – Spring Lake

The route from Beverly to Spring Lake stays within Alberta. The straight-line distance is about 48.1 km, with an estimated road distance of 63 km — a short route (under 100 km). Suitable for daily commuting, errands, or a day trip. Use the live planner for an up-to-date track, turn-by-turn directions, and a trip-cost estimate.

Practical tips for the Beverly – Spring Lake drive

Terrain along the way

The route stays within Alberta, prairie in the south rising into the Canadian Rockies in the west.

When to leave

For a short route, avoid morning rush hour (07:30–09:00) and evening rush (15:30–18:00) on weekdays. Saturday morning and Sunday late morning typically have lighter traffic.

Explore Spring Lake

Full information about Spring Lake: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Spring Lake.

Spring Lake profile →

Explore Beverly

Full information about Beverly: map, GPS coordinates, and all routes from Beverly to other Canadian cities.

Beverly profile →

Related tools

Cities along the Beverly – Spring Lake route

These cities are near the direct route between Beverly and Spring Lake. They may be useful as a stopover or alternate destination.

Routes with intermediate stops: Beverly → Spruce Grove · Beverly → St. Albert · Beverly → Villeneuve

Related routes

From Beverly to other cities:

To Spring Lake from other cities:

From Spring Lake to intermediate cities:

All info about Beverly →  ·  All info about Spring Lake →

Popular routes from Alberta

Most-searched routes from Alberta, ranked by popularity.

All cities of Alberta →

Frequently asked questions: Beverly – Spring Lake

What is the straight-line distance between Beverly and Spring Lake?

The straight-line distance between Beverly and Spring Lake is about 48.1 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Beverly to Spring Lake?

The estimated road distance from Beverly to Spring Lake is about 63 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Beverly to Spring Lake?

Indicative drive time from Beverly to Spring Lake is about 42 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Beverly to Spring Lake?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Beverly–Spring Lake route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Beverly to Spring Lake?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Beverly to Spring Lake?

A common alternative is going via Spruce Grove or St. Albert. Use the live planner to compare routes.

Can I open the Beverly–Spring Lake route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Beverly as origin and Spring Lake as destination.