Driving route · Canada

Route from Braim to Raymore

Interactive map, distance, and indicative drive time for the route from Braim to Raymore — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Braim (Alberta) and Raymore (Saskatchewan). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Braim to Raymore

The straight-line distance between Braim and Raymore is 614 km. The estimated road distance by car is around 694 km, with an indicative drive time of 7 h 43 min.

Straight-line distance 614 km
Estimated road distance ~694 km
Indicative drive time 7 h 43 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Braim – Raymore

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $78–$105

Estimate: ~694 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Braim to Raymore

The map shows the locations of Braim (A) and Raymore (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Estimate trip cost: Braim – Raymore

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~694 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Braim

Alberta · 53.04360, -112.82700

Braim is a small rural community in northeastern Alberta. On a provincial map it appears as a low-density settlement within a broader rural landscape and is not part of a large metropolitan area. For drivers, Braim…

Destination

Raymore

Saskatchewan · 51.24200, -104.31400

Raymore sits in east-central Saskatchewan on the prairie and functions primarily as a small rural town marking connections among surrounding farms and nearby communities. It is not part of a metropolitan area but…

How to drive from Braim to Raymore

The straight-line distance between Braim (Alberta) and Raymore (Saskatchewan) is about 614 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Braim – Raymore

Planning a trip from Braim to Raymore means budgeting around 694 km on the road and an indicative drive time of 7 h 43 min by car. The route connects Alberta to Saskatchewan and falls into a long route (over 300 km). Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections.

The trip starts at Braim (Alberta) — coordinates 53.0436° N, -112.8270° E. The destination is Raymore (Saskatchewan), at 51.2420° N, -104.3140° E.

Practical tips for the Braim – Raymore drive

Terrain along the way

The route starts in Alberta — a province prairie in the south rising into the Canadian Rockies in the west — and reaches Raymore in Saskatchewan, prairie to the south and boreal forest, lakes, and Shield country to the north. The route also passes near Plenty (Saskatchewan).

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 694 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Raymore

Full information about Raymore: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Raymore.

Raymore profile →

Explore Braim

Full information about Braim: map, GPS coordinates, and all routes from Braim to other Canadian cities.

Braim profile →

Related tools

Cities along the Braim – Raymore route

These cities are near the direct route between Braim and Raymore. They may be useful as a stopover or alternate destination.

Routes with intermediate stops: Braim → Plenty · Braim → Unity · Braim → Luseland

Related routes

From Braim to other cities:

To Raymore from other cities:

From Raymore to intermediate cities:

All info about Braim →  ·  All info about Raymore →

Popular routes from Alberta

Most-searched routes from Alberta, ranked by popularity.

All cities of Alberta →

Frequently asked questions: Braim – Raymore

What is the straight-line distance between Braim and Raymore?

The straight-line distance between Braim and Raymore is about 614 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Braim to Raymore?

The estimated road distance from Braim to Raymore is about 694 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Braim to Raymore?

Indicative drive time from Braim to Raymore is about 7 h 43 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Braim to Raymore?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Braim–Raymore route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Braim to Raymore?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Braim to Raymore?

A common alternative is going via Plenty or Unity. Use the live planner to compare routes.

Can I open the Braim–Raymore route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Braim as origin and Raymore as destination.