Driving route · Canada

Route from Castor to Pelican Pointe

Interactive map, distance, and indicative drive time for the route from Castor to Pelican Pointe — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Castor (Alberta) and Pelican Pointe (Saskatchewan). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Castor to Pelican Pointe

The straight-line distance between Castor and Pelican Pointe is 500.7 km. The estimated road distance by car is around 566 km, with an indicative drive time of 6 h 17 min.

Straight-line distance 500.7 km
Estimated road distance ~566 km
Indicative drive time 6 h 17 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Castor – Pelican Pointe

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $64–$86

Estimate: ~566 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Castor to Pelican Pointe

The map shows the locations of Castor (A) and Pelican Pointe (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Castor to Pelican Pointe

Real distance: 656.6 km  ·  Estimated time: 7 h 47 min

🗓 Calculated on June 4, 2026
  1. Drive northwest on 49 Avenue. 44 m
  2. Turn left onto 45 Street/861. 198 m
  3. Turn left onto Highway 12/12. 4.3 km
  4. Turn right onto Veterans Memorial Highway/36. 64.1 km
  5. Turn left onto 9/36/Veterans Memorial Highway. 278.3 km
  6. Turn right onto Highway 4/4. 4.9 km
  7. Turn left onto 15. 66.8 km
  8. Turn right onto Saskatchewan Avenue/15. Continue on 15. 55.8 km
  9. Bear right onto 11/Louis Riel Trail. 146.4 km
  10. Take the 20 North exit toward Lumsden Craven. 374 m
  11. Turn left onto Highway 20/20. 16.9 km
  12. Turn left onto 322. 9.1 km

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Castor – Pelican Pointe

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~566 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Castor

Alberta · 52.22000, -111.90900

Castor sits in east-central Alberta at latitude 52.22, longitude -111.909. The small town occupies a compact footprint amid agricultural prairie and functions as a local route point for surrounding farms and hamlets. On…

Destination

Pelican Pointe

Saskatchewan · 50.80400, -105.03700

Pelican Pointe is a very small community in southern Saskatchewan set within the province’s prairie landscape. On a regional map it appears as a compact cluster of dwellings and lots amid farmland and small patches of…

How to drive from Castor to Pelican Pointe

The straight-line distance between Castor (Alberta) and Pelican Pointe (Saskatchewan) is about 500.7 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Castor – Pelican Pointe

The route from Castor to Pelican Pointe connects Alberta to Saskatchewan. The straight-line distance is about 500.7 km, with an estimated road distance of 566 km — a long route (over 300 km). Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections. Use the live planner for an up-to-date track, turn-by-turn directions, and a trip-cost estimate.

The trip starts at Castor (Alberta) — coordinates 52.2200° N, -111.9090° E. The destination is Pelican Pointe (Saskatchewan), at 50.8040° N, -105.0370° E.

Practical tips for the Castor – Pelican Pointe drive

Terrain along the way

The route starts in Alberta — a province prairie in the south rising into the Canadian Rockies in the west — and reaches Pelican Pointe in Saskatchewan, prairie to the south and boreal forest, lakes, and Shield country to the north. The route also passes near Rosetown (Saskatchewan).

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 566 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Pelican Pointe

Full information about Pelican Pointe: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Pelican Pointe.

Pelican Pointe profile →

Explore Castor

Full information about Castor: map, GPS coordinates, and all routes from Castor to other Canadian cities.

Castor profile →

Related tools

Cities along the Castor – Pelican Pointe route

These cities are near the direct route between Castor and Pelican Pointe. They may be useful as a stopover or alternate destination.

Routes with intermediate stops: Castor → Rosetown · Castor → Plenty · Castor → Eston

Related routes

From Castor to other cities:

To Pelican Pointe from other cities:

From Pelican Pointe to intermediate cities:

All info about Castor →  ·  All info about Pelican Pointe →

Popular routes from Alberta

Most-searched routes from Alberta, ranked by popularity.

All cities of Alberta →

Frequently asked questions: Castor – Pelican Pointe

What is the straight-line distance between Castor and Pelican Pointe?

The straight-line distance between Castor and Pelican Pointe is about 500.7 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Castor to Pelican Pointe?

The estimated road distance from Castor to Pelican Pointe is about 566 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Castor to Pelican Pointe?

Indicative drive time from Castor to Pelican Pointe is about 6 h 17 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Castor to Pelican Pointe?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Castor–Pelican Pointe route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Castor to Pelican Pointe?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Castor to Pelican Pointe?

A common alternative is going via Rosetown or Plenty. Use the live planner to compare routes.

Can I open the Castor–Pelican Pointe route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Castor as origin and Pelican Pointe as destination.