Route from Erskine to Enderby
Interactive map, distance, and indicative drive time for the route from Erskine to Enderby — with the live planner for up-to-date turn-by-turn directions.
This page provides the map and indicative distance data for the route between Erskine (Alberta) and Enderby (British Columbia). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.
Distance from Erskine to Enderby
The straight-line distance between Erskine and Enderby is 476.3 km. The estimated road distance by car is around 538 km, with an indicative drive time of 5 h 59 min.
Trip cost and route type: Erskine – Enderby
Driving directions from Erskine to Enderby
The map shows the locations of Erskine (A) and Enderby (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.
Turn-by-turn directions
Prefer another app? Open in Google Maps ↗
Driving directions from Erskine to Enderby
Real distance: 739.9 km · Estimated time: 8 h 50 min
- Drive west. 10 m
- Turn left onto McNabb Street. 311 m
- Turn right onto Highway 12/12. Continue on 12. 89.3 km
- Enter the roundabout and take the 2nd exit toward Rocky Mountain House. 58.6 km
- Turn left onto Highway 22/22. 6.6 km
- Make a right U-turn onto 11. 174.2 km
- Turn left onto Icefields Parkway/Promenade des Glaciers/93. 75.8 km
- Take the 1 exit. 144.6 km
- Keep left to take 1/Trans-Canada Highway. 150.7 km
- Take the exit on the left. 117 m
- Turn left onto BC 97A/Highway 97A/Vernon-Sicamous Highway. Continue on BC 97A/Vernon-Sicamous Highway. 124 m
- Enter the roundabout and take the 2nd exit onto BC 97A/Vernon-Sicamous Highway. 53 m
Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.
Estimate trip cost: Erskine – Enderby
Indicative estimates based on ~538 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.
Origin and destination
How to drive from Erskine to Enderby
The straight-line distance between Erskine (Alberta) and Enderby (British Columbia) is about 476.3 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.
Before you leave, consider:
- Check current traffic with a navigation app — particularly around major cities.
- Look up any toll segments on your route (Ontario 407, select bridges).
- In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
- Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.
Route description: Erskine – Enderby
The route connects Alberta to British Columbia: from Erskine to Enderby you cover roughly 538 km on the road (geometric distance 476.3 km). A long route (over 300 km). Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections. The live planner calculates the optimal route with step-by-step instructions and trip cost.
The trip starts at Erskine (Alberta) — coordinates 52.3214° N, -112.8800° E. The destination is Enderby (British Columbia), at 50.5508° N, -119.1400° E.
Practical tips for the Erskine – Enderby drive
Terrain along the way
The route starts in Alberta — a province prairie in the south rising into the Canadian Rockies in the west — and reaches Enderby in British Columbia, mountainous, with the Coast Mountains, the Rockies, and a long Pacific coastline. The route also passes near Lake Louise (Alberta).
When to leave
For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.
Alternatives
For this route of about 538 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.
Explore Enderby
Full information about Enderby: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Enderby.
Enderby profile →Explore Erskine
Full information about Erskine: map, GPS coordinates, and all routes from Erskine to other Canadian cities.
Erskine profile →Related tools
Driving Directions
Live planner with turn-by-turn directions from Erskine to Enderby.
Interactive map
Open the area between Erskine and Enderby on the map.
GPS coordinates
Find precise coordinates for any point along the route.
Distance calculator
Measure straight-line distances between intermediate points.
Elevation
Check elevation along the route — useful for mountain passes.
Satellite map
View the terrain between Erskine and Enderby in satellite imagery.
Cities along the Erskine – Enderby route
These cities are near the direct route between Erskine and Enderby. They may be useful as a stopover or alternate destination.
Routes with intermediate stops: Erskine → Lake Louise · Erskine → Banff · Erskine → Canmore
Related routes
From Erskine to other cities:
To Enderby from other cities:
From Enderby to intermediate cities:
Popular routes from Alberta
Most-searched routes from Alberta, ranked by popularity.
Frequently asked questions: Erskine – Enderby
What is the straight-line distance between Erskine and Enderby?
The straight-line distance between Erskine and Enderby is about 476.3 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.
What is the estimated road distance from Erskine to Enderby?
The estimated road distance from Erskine to Enderby is about 538 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.
How long does it take to drive from Erskine to Enderby?
Indicative drive time from Erskine to Enderby is about 5 h 59 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.
How do I get up-to-date driving directions from Erskine to Enderby?
Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.
Does the Erskine–Enderby route involve highway tolls?
CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.
How does traffic affect the route from Erskine to Enderby?
Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.
Is there an alternative route from Erskine to Enderby?
A common alternative is going via Lake Louise or Banff. Use the live planner to compare routes.
Can I open the Erskine–Enderby route in Google Maps?
Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Erskine as origin and Enderby as destination.