Driving route · Canada

Route from Erskine to Broadview

Interactive map, distance, and indicative drive time for the route from Erskine to Broadview — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Erskine (Alberta) and Broadview (Saskatchewan). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Erskine to Broadview

The straight-line distance between Erskine and Broadview is 746.6 km. The estimated road distance by car is around 844 km, with an indicative drive time of 9 h 22 min.

Straight-line distance 746.6 km
Estimated road distance ~844 km
Indicative drive time 9 h 22 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Erskine – Broadview

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $95–$128

Estimate: ~844 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Erskine to Broadview

The map shows the locations of Erskine (A) and Broadview (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Erskine to Broadview

Real distance: 873.0 km  ·  Estimated time: 10 h 11 min

🗓 Calculated on June 4, 2026
  1. Drive west. 10 m
  2. Turn left onto McNabb Street. 311 m
  3. Turn left onto Highway 12/12. Continue on 12. 12.4 km
  4. Turn right onto 50 Street/12. Continue on 12. 62.3 km
  5. Turn right onto Veterans Memorial Highway/36. 64.1 km
  6. Turn left onto 9/36/Veterans Memorial Highway. 278.3 km
  7. Turn right onto Highway 4/4. 4.9 km
  8. Turn left onto 15. 66.8 km
  9. Turn right onto Saskatchewan Avenue/15. Continue on 15. 55.8 km
  10. Bear right onto 11/Louis Riel Trail. 163.9 km
  11. Keep left to take 11A/Louis Riel Trail toward Regina. 5.6 km
  12. Take the Pasqua Street exit. 511 m

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Erskine – Broadview

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~844 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Erskine

Alberta · 52.32140, -112.88000

Erskine sits in central Alberta on the province's agricultural plains, occupying a small, easily identified cluster of buildings within a rural road pattern. The community functions as a local waypoint on maps for…

Destination

Broadview

Saskatchewan · 50.37600, -102.57900

Broadview sits on the southern prairie of Saskatchewan, a compact town serving local agricultural districts and travellers on regional roads. With a population of about 611, Broadview is not part of a metropolitan area…

How to drive from Erskine to Broadview

The straight-line distance between Erskine (Alberta) and Broadview (Saskatchewan) is about 746.6 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Erskine – Broadview

The route from Erskine to Broadview connects Alberta to Saskatchewan. The straight-line distance is about 746.6 km, with an estimated road distance of 844 km — a long route (over 300 km). Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections. Use the live planner for an up-to-date track, turn-by-turn directions, and a trip-cost estimate.

The trip starts at Erskine (Alberta) — coordinates 52.3214° N, -112.8800° E. The destination is Broadview (Saskatchewan), at 50.3760° N, -102.5790° E.

Practical tips for the Erskine – Broadview drive

Terrain along the way

The route starts in Alberta — a province prairie in the south rising into the Canadian Rockies in the west — and reaches Broadview in Saskatchewan, prairie to the south and boreal forest, lakes, and Shield country to the north. The route also passes near Rosetown (Saskatchewan).

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 844 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Broadview

Full information about Broadview: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Broadview.

Broadview profile →

Explore Erskine

Full information about Erskine: map, GPS coordinates, and all routes from Erskine to other Canadian cities.

Erskine profile →

Related tools

Cities along the Erskine – Broadview route

These cities are near the direct route between Erskine and Broadview. They may be useful as a stopover or alternate destination.

Routes with intermediate stops: Erskine → Rosetown · Erskine → Harris · Erskine → Outlook

Related routes

From Erskine to other cities:

To Broadview from other cities:

From Broadview to intermediate cities:

All info about Erskine →  ·  All info about Broadview →

Popular routes from Alberta

Most-searched routes from Alberta, ranked by popularity.

All cities of Alberta →

Frequently asked questions: Erskine – Broadview

What is the straight-line distance between Erskine and Broadview?

The straight-line distance between Erskine and Broadview is about 746.6 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Erskine to Broadview?

The estimated road distance from Erskine to Broadview is about 844 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Erskine to Broadview?

Indicative drive time from Erskine to Broadview is about 9 h 22 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Erskine to Broadview?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Erskine–Broadview route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Erskine to Broadview?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Erskine to Broadview?

A common alternative is going via Rosetown or Harris. Use the live planner to compare routes.

Can I open the Erskine–Broadview route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Erskine as origin and Broadview as destination.