Driving route · Canada

Route from Nanaimo to Raymond

Interactive map, distance, and indicative drive time for the route from Nanaimo to Raymond — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Nanaimo (British Columbia) and Raymond (Alberta). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Nanaimo to Raymond

The straight-line distance between Nanaimo and Raymond is 817.9 km. The estimated road distance by car is around 924 km, with an indicative drive time of 10 h 16 min.

Straight-line distance 817.9 km
Estimated road distance ~924 km
Indicative drive time 10 h 16 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Nanaimo – Raymond

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $104–$140

Estimate: ~924 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Nanaimo to Raymond

The map shows the locations of Nanaimo (A) and Raymond (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Nanaimo to Raymond

Real distance: 1,290.2 km  ·  Estimated time: 19 h 1 min

🗓 Calculated on June 4, 2026
  1. Drive southeast on 1/Terminal Avenue/Route Transcanadienne. 150 m
  2. Turn right onto 1/Terminal Avenue/Route Transcanadienne. Continue on 1/Route Transcanadienne. 4.7 km
  3. Stay straight to take the ramp toward Victoria. 1.2 km
  4. Take exit 7 onto 19 East toward Vancouver/Delta. 8.7 km
  5. Bear right onto Duke Point Ferry Terminal. 321 m
  6. Turn left. 36 m
  7. Bear right onto 1. 258 m
  8. Turn left to take the ramp. 27 m
  9. Bear right onto 19/Duke Point Ferry Terminal. Continue on 19. 260 m
  10. Take the Berth 3 approach Ferry. 66.6 km
  11. Take the exit. 51 m
  12. Keep right to take BC 17 East. 7.7 km

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Nanaimo – Raymond

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~924 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Nanaimo

British Columbia · 49.16420, -123.93600

Nanaimo sits on the east coast of Vancouver Island in British Columbia, roughly midway between the island’s southern and northern population centres. On provincial and regional maps it reads as a principal coastal city…

Destination

Raymond

Alberta · 49.46580, -112.65100

Raymond sits in southern Alberta on the prairie, offering a clear map reference for drivers moving through a rural, agricultural landscape. The town serves surrounding farming districts and acts as a waypoint for local…

How to drive from Nanaimo to Raymond

The straight-line distance between Nanaimo (British Columbia) and Raymond (Alberta) is about 817.9 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Nanaimo – Raymond

The journey from Nanaimo to Raymond covers roughly 924 km on the road, equal to 817.9 km straight line. The trip connects British Columbia to Alberta and is classified as a long route (over 300 km). Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections. Open the interactive planner for the route map, turns, and a fuel-or-EV cost calculator.

The trip starts at Nanaimo (British Columbia) — coordinates 49.1642° N, -123.9360° E. The destination is Raymond (Alberta), at 49.4658° N, -112.6510° E.

Practical tips for the Nanaimo – Raymond drive

Terrain along the way

The route starts in British Columbia — a province mountainous, with the Coast Mountains, the Rockies, and a long Pacific coastline — and reaches Raymond in Alberta, prairie in the south rising into the Canadian Rockies in the west. The route also passes near Grand Forks (British Columbia).

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 924 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Raymond

Full information about Raymond: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Raymond.

Raymond profile →

Explore Nanaimo

Full information about Nanaimo: map, GPS coordinates, and all routes from Nanaimo to other Canadian cities.

Nanaimo profile →

Related tools

Cities along the Nanaimo – Raymond route

These cities are near the direct route between Nanaimo and Raymond. They may be useful as a stopover or alternate destination.

Routes with intermediate stops: Nanaimo → Grand Forks · Nanaimo → Greenwood · Nanaimo → Castlegar

Related routes

From Nanaimo to other cities:

To Raymond from other cities:

From Raymond to intermediate cities:

All info about Nanaimo →  ·  All info about Raymond →

Similar-distance routes from Nanaimo

Other routes from Nanaimo with comparable distance (491–1145 km straight line).

Popular routes from British Columbia

Most-searched routes from British Columbia, ranked by popularity.

All cities of British Columbia →

Frequently asked questions: Nanaimo – Raymond

What is the straight-line distance between Nanaimo and Raymond?

The straight-line distance between Nanaimo and Raymond is about 817.9 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Nanaimo to Raymond?

The estimated road distance from Nanaimo to Raymond is about 924 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Nanaimo to Raymond?

Indicative drive time from Nanaimo to Raymond is about 10 h 16 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Nanaimo to Raymond?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Nanaimo–Raymond route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Nanaimo to Raymond?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Nanaimo to Raymond?

A common alternative is going via Grand Forks or Greenwood. Use the live planner to compare routes.

Can I open the Nanaimo–Raymond route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Nanaimo as origin and Raymond as destination.