Driving route · Canada

Route from Powerview-Pine Falls to Porcupine Plain

Interactive map, distance, and indicative drive time for the route from Powerview-Pine Falls to Porcupine Plain — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Powerview-Pine Falls (Manitoba) and Porcupine Plain (Saskatchewan). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Powerview-Pine Falls to Porcupine Plain

The straight-line distance between Powerview-Pine Falls and Porcupine Plain is 536.7 km. The estimated road distance by car is around 606 km, with an indicative drive time of 6 h 44 min.

Straight-line distance 536.7 km
Estimated road distance ~606 km
Indicative drive time 6 h 44 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Powerview-Pine Falls – Porcupine Plain

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $68–$92

Estimate: ~606 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Powerview-Pine Falls to Porcupine Plain

The map shows the locations of Powerview-Pine Falls (A) and Porcupine Plain (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Powerview-Pine Falls to Porcupine Plain

Real distance: 798.8 km  ·  Estimated time: 9 h 59 min

🗓 Calculated on June 4, 2026
  1. Drive east on Laura Street. 159 m
  2. Bear right onto Provincial Trunk Highway 11/Route Provinciale à Grande Circulation 11/PTH 11. 905 m
  3. Turn right onto Provincial Road 304/PR 304. 34.5 km
  4. Turn left onto Provincial Trunk Highway 59/Route Provinciale à Grande Circulation 59/PTH 59/PTH 12. Continue on PTH 59. 36.4 km
  5. Bear right onto Provincial Trunk Highway 4/PTH 4. 14.0 km
  6. Turn right onto McPhillips Road/PR 230. 10.6 km
  7. Turn left onto McPhillips Street/PTH 8. 9.4 km
  8. Take the Perimeter Highway exit. 26.9 km
  9. Take exit 42B onto PTH 1 West toward Brandon. 85.9 km
  10. Take the 16 West exit toward Saskatoon. 222 m
  11. Bear right onto PTH 16/Yellowhead Highway/Route Yellowhead. Continue on PTH 16. 115.3 km
  12. Turn right to take the ramp toward Dauphin/Russell. 6.2 km

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Powerview-Pine Falls – Porcupine Plain

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~606 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Powerview-Pine Falls

Manitoba · 50.56610, -96.19810

Powerview-Pine Falls sits in eastern Manitoba on a stretch of the Winnipeg River, forming a small twin community where a compact grid meets a river valley and forested landscape. On regional maps it registers as a local…

Destination

Porcupine Plain

Saskatchewan · 52.59800, -103.24800

Porcupine Plain lies in east‑central Saskatchewan on the transition between agricultural prairie and boreal woodland. On road maps it appears as a small, compact town serving surrounding farms, lakeside properties and…

How to drive from Powerview-Pine Falls to Porcupine Plain

The straight-line distance between Powerview-Pine Falls (Manitoba) and Porcupine Plain (Saskatchewan) is about 536.7 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Powerview-Pine Falls – Porcupine Plain

From Powerview-Pine Falls to Porcupine Plain the estimated road distance is roughly 606 km (536.7 km straight line). The trip connects Manitoba to Saskatchewan and is a long route (over 300 km). Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections. The live planner provides turn-by-turn instructions, indicative arrival time, and a fuel-or-electricity cost estimate.

The trip starts at Powerview-Pine Falls (Manitoba) — coordinates 50.5661° N, -96.1981° E. The destination is Porcupine Plain (Saskatchewan), at 52.5980° N, -103.2480° E.

Practical tips for the Powerview-Pine Falls – Porcupine Plain drive

Terrain along the way

The route starts in Manitoba — a province prairie and lake country, with thousands of lakes and rivers — and reaches Porcupine Plain in Saskatchewan, prairie to the south and boreal forest, lakes, and Shield country to the north. The route also passes near Winnipegosis (Manitoba).

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 606 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Porcupine Plain

Full information about Porcupine Plain: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Porcupine Plain.

Porcupine Plain profile →

Explore Powerview-Pine Falls

Full information about Powerview-Pine Falls: map, GPS coordinates, and all routes from Powerview-Pine Falls to other Canadian cities.

Powerview-Pine Falls profile →

Related tools

Cities along the Powerview-Pine Falls – Porcupine Plain route

These cities are near the direct route between Powerview-Pine Falls and Porcupine Plain. They may be useful as a stopover or alternate destination.

Routes with intermediate stops: Powerview-Pine Falls → Winnipegosis · Powerview-Pine Falls → Dauphin · Powerview-Pine Falls → McCreary

Related routes

From Powerview-Pine Falls to other cities:

To Porcupine Plain from other cities:

From Porcupine Plain to intermediate cities:

All info about Powerview-Pine Falls →  ·  All info about Porcupine Plain →

Popular routes from Manitoba

Most-searched routes from Manitoba, ranked by popularity.

All cities of Manitoba →

Frequently asked questions: Powerview-Pine Falls – Porcupine Plain

What is the straight-line distance between Powerview-Pine Falls and Porcupine Plain?

The straight-line distance between Powerview-Pine Falls and Porcupine Plain is about 536.7 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Powerview-Pine Falls to Porcupine Plain?

The estimated road distance from Powerview-Pine Falls to Porcupine Plain is about 606 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Powerview-Pine Falls to Porcupine Plain?

Indicative drive time from Powerview-Pine Falls to Porcupine Plain is about 6 h 44 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Powerview-Pine Falls to Porcupine Plain?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Powerview-Pine Falls–Porcupine Plain route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Powerview-Pine Falls to Porcupine Plain?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Powerview-Pine Falls to Porcupine Plain?

A common alternative is going via Winnipegosis or Dauphin. Use the live planner to compare routes.

Can I open the Powerview-Pine Falls–Porcupine Plain route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Powerview-Pine Falls as origin and Porcupine Plain as destination.