Driving route · Canada

Route from Lancaster to Fabre

Interactive map, distance, and indicative drive time for the route from Lancaster to Fabre — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Lancaster (New Brunswick) and Fabre (Quebec). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Lancaster to Fabre

The straight-line distance between Lancaster and Fabre is 1042 km. The estimated road distance by car is around 1177 km, with an indicative drive time of 13 h 5 min.

Straight-line distance 1042 km
Estimated road distance ~1177 km
Indicative drive time 13 h 5 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Lancaster – Fabre

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $132–$179

Estimate: ~1177 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Lancaster to Fabre

The map shows the locations of Lancaster (A) and Fabre (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Lancaster to Fabre

Real distance: 1,559.5 km  ·  Estimated time: 20 h 35 min

🗓 Calculated on June 4, 2026
  1. Drive southwest. 119 m
  2. Turn right. 156 m
  3. Turn right onto Fairville Boulevard/NB 100. 548 m
  4. Turn right onto Catherwood Street. 96 m
  5. Turn right to take the 1 West ramp toward 7/Saint Stephen/Fredericton. 4.9 km
  6. Take exit 114 onto 7 toward Grand Bay-Westfield/Fredericton. 6.4 km
  7. Keep left to stay on NB 7. 69.2 km
  8. Keep left to take 2 West/7 North toward Oromocto/Fredericton. 13.7 km
  9. Keep left to stay on NB 2/TCH/Route 2/Route 2 Highway. 334.3 km
  10. Keep left to take 85. 52.6 km
  11. Keep left to take 85/Autoroute Claude-Béchard. 191.3 km
  12. Keep left to stay on 20/Autoroute Jean-Lesage toward Montréal. 104.2 km

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Lancaster – Fabre

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~1177 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Lancaster

New Brunswick · 45.25000, -66.10000

Lancaster is a community on New Brunswick’s southern coast, situated adjacent to the larger Saint John urban area. On provincial maps it appears as a coastal suburb and local waypoint where urban streets meet waterfront…

Destination

Fabre

Quebec · 47.20000, -79.36670

Fabre is a small inland community in western Quebec, positioned well inland from the Saint Lawrence corridor and outside any large metropolitan agglomeration. On road maps it appears as a local settlement amid a largely…

How to drive from Lancaster to Fabre

The straight-line distance between Lancaster (New Brunswick) and Fabre (Quebec) is about 1042 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Lancaster – Fabre

The distance from Lancaster to Fabre is estimated at 1177 km on a mixed road profile, starting from 1042 km straight line. It is a long route (over 300 km) that connects New Brunswick to Quebec. Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections. Calculate the current route with the live planner for detailed instructions.

The trip starts at Lancaster (New Brunswick) — coordinates 45.2500° N, -66.1000° E. The destination is Fabre (Quebec), at 47.2000° N, -79.3667° E.

Practical tips for the Lancaster – Fabre drive

Terrain along the way

The route starts in New Brunswick — a province forested and Acadian, with the Bay of Fundy and tidal coastlines — and reaches Fabre in Quebec, St. Lawrence valley framed by the Laurentians and the Appalachians. The route also passes near Pointe-du-Lac (Quebec).

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 1177 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Fabre

Full information about Fabre: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Fabre.

Fabre profile →

Explore Lancaster

Full information about Lancaster: map, GPS coordinates, and all routes from Lancaster to other Canadian cities.

Lancaster profile →

Related tools

Cities along the Lancaster – Fabre route

These cities are near the direct route between Lancaster and Fabre. They may be useful as a stopover or alternate destination.

Routes with intermediate stops: Lancaster → Pointe-du-Lac · Lancaster → Saint-Grégoire · Lancaster → Trois-Rivières

Related routes

From Lancaster to other cities:

To Fabre from other cities:

From Fabre to intermediate cities:

All info about Lancaster →  ·  All info about Fabre →

Popular routes from New Brunswick

Most-searched routes from New Brunswick, ranked by popularity.

All cities of New Brunswick →

Frequently asked questions: Lancaster – Fabre

What is the straight-line distance between Lancaster and Fabre?

The straight-line distance between Lancaster and Fabre is about 1042 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Lancaster to Fabre?

The estimated road distance from Lancaster to Fabre is about 1177 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Lancaster to Fabre?

Indicative drive time from Lancaster to Fabre is about 13 h 5 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Lancaster to Fabre?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Lancaster–Fabre route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Lancaster to Fabre?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Lancaster to Fabre?

A common alternative is going via Pointe-du-Lac or Saint-Grégoire. Use the live planner to compare routes.

Can I open the Lancaster–Fabre route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Lancaster as origin and Fabre as destination.