Driving route · Canada

Route from Brookfield to Marysville

Interactive map, distance, and indicative drive time for the route from Brookfield to Marysville — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Brookfield (Nova Scotia) and Marysville (New Brunswick). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Brookfield to Marysville

The straight-line distance between Brookfield and Marysville is 268.2 km. The estimated road distance by car is around 303 km, with an indicative drive time of 3 h 22 min.

Straight-line distance 268.2 km
Estimated road distance ~303 km
Indicative drive time 3 h 22 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Brookfield – Marysville

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $34–$46

Estimate: ~303 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Brookfield to Marysville

The map shows the locations of Brookfield (A) and Marysville (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Brookfield to Marysville

Real distance: 352.5 km  ·  Estimated time: 4 h 35 min

🗓 Calculated on June 4, 2026
  1. Drive west on Sunset Street. 163 m
  2. Turn left onto Highway 2/NS 2/Trunk 2. 246 m
  3. Turn right onto Pleasant Valley Road/NS 289. 864 m
  4. Turn left to take the Highway 102 ramp. 15.7 km
  5. Keep left to take NS 104 toward Highway 104. 129 m
  6. Take the exit. 197.9 km
  7. Keep right to take NB 2/TCH/Route 2/Route 2 Highway toward Fredericton. 91.1 km
  8. Take exit 333 onto 105 toward Sheffield. 423 m
  9. Keep right to take 105 toward Sheffield. 39.6 km
  10. Keep right to take 8North/105/10 toward Fredericton Centre/Miramichi/Minto. 704 m
  11. Turn right to take the ramp. 69 m
  12. Bear right onto NB 8/Barker's Point Bypass. 1.7 km

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Brookfield – Marysville

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~303 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Brookfield

Nova Scotia · 45.25660, -63.27840

Brookfield is a small inland community in central Nova Scotia. On provincial maps it appears as a compact village within a patchwork of farmland, mixed woodland and small watercourses. With an approximate population of…

Destination

Marysville

New Brunswick · 45.93400, -66.58730

Marysville lies in central New Brunswick amid a mixed forest and agricultural landscape. On provincial maps it appears as a compact settlement that functions primarily as a local waypoint for drivers moving between…

How to drive from Brookfield to Marysville

The straight-line distance between Brookfield (Nova Scotia) and Marysville (New Brunswick) is about 268.2 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Brookfield – Marysville

The journey from Brookfield to Marysville covers roughly 303 km on the road, equal to 268.2 km straight line. The trip connects Nova Scotia to New Brunswick and is classified as a long route (over 300 km). Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections. Open the interactive planner for the route map, turns, and a fuel-or-EV cost calculator.

The trip starts at Brookfield (Nova Scotia) — coordinates 45.2566° N, -63.2784° E. The destination is Marysville (New Brunswick), at 45.9340° N, -66.5873° E.

Practical tips for the Brookfield – Marysville drive

Terrain along the way

The route starts in Nova Scotia — a province maritime, with Atlantic coves, harbours, and Cape Breton's highlands — and reaches Marysville in New Brunswick, forested and Acadian, with the Bay of Fundy and tidal coastlines.

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 303 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Marysville

Full information about Marysville: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Marysville.

Marysville profile →

Explore Brookfield

Full information about Brookfield: map, GPS coordinates, and all routes from Brookfield to other Canadian cities.

Brookfield profile →

Related tools

Related routes

From Brookfield to other cities:

To Marysville from other cities:

All info about Brookfield →  ·  All info about Marysville →

Popular routes from Nova Scotia

Most-searched routes from Nova Scotia, ranked by popularity.

All cities of Nova Scotia →

Frequently asked questions: Brookfield – Marysville

What is the straight-line distance between Brookfield and Marysville?

The straight-line distance between Brookfield and Marysville is about 268.2 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Brookfield to Marysville?

The estimated road distance from Brookfield to Marysville is about 303 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Brookfield to Marysville?

Indicative drive time from Brookfield to Marysville is about 3 h 22 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Brookfield to Marysville?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Brookfield–Marysville route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Brookfield to Marysville?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Brookfield to Marysville?

For alternative routes, use the live planner: pick between highways, secondary roads, and shorter or scenic options.

Can I open the Brookfield–Marysville route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Brookfield as origin and Marysville as destination.