Driving route · Canada

Route from Lantz to Marysville

Interactive map, distance, and indicative drive time for the route from Lantz to Marysville — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Lantz (Nova Scotia) and Marysville (New Brunswick). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Lantz to Marysville

The straight-line distance between Lantz and Marysville is 264.6 km. The estimated road distance by car is around 299 km, with an indicative drive time of 3 h 19 min.

Straight-line distance 264.6 km
Estimated road distance ~299 km
Indicative drive time 3 h 19 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Lantz – Marysville

Route type Medium

Medium-distance route (100–300 km) — plan a stop and check fuel before departure.

Indicative fuel cost $34–$45

Estimate: ~299 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Lantz to Marysville

The map shows the locations of Lantz (A) and Marysville (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Lantz to Marysville

Real distance: 387.8 km  ·  Estimated time: 4 h 52 min

🗓 Calculated on June 4, 2026
  1. Drive southwest on Highway 2/NS 2/Trunk 2. Continue on Highway 2. 1.1 km
  2. Enter the roundabout and take the 1st exit onto Lantz Connector. 913 m
  3. Take the Highway 102 ramp. 50.2 km
  4. Keep left to take NS 104 toward Highway 104. 129 m
  5. Take the exit. 197.9 km
  6. Keep right to take NB 2/TCH/Route 2/Route 2 Highway toward Fredericton. 91.1 km
  7. Take exit 333 onto 105 toward Sheffield. 423 m
  8. Keep right to take 105 toward Sheffield. 39.6 km
  9. Keep right to take 8North/105/10 toward Fredericton Centre/Miramichi/Minto. 704 m
  10. Turn right to take the ramp. 69 m
  11. Bear right onto NB 8/Barker's Point Bypass. 1.7 km
  12. Turn right onto Promenade Greenwood/NB 10. Continue on NB 10. 724 m

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Lantz – Marysville

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~299 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Lantz

Nova Scotia · 44.98940, -63.47360

Lantz sits in the central mainland of Nova Scotia, occupying a small inland footprint within the province’s network of rural and suburban communities. With a population of about 1,700, the settlement functions as a…

Destination

Marysville

New Brunswick · 45.93400, -66.58730

Marysville lies in central New Brunswick amid a mixed forest and agricultural landscape. On provincial maps it appears as a compact settlement that functions primarily as a local waypoint for drivers moving between…

How to drive from Lantz to Marysville

The straight-line distance between Lantz (Nova Scotia) and Marysville (New Brunswick) is about 264.6 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Lantz – Marysville

Planning a trip from Lantz to Marysville means budgeting around 299 km on the road and an indicative drive time of 3 h 19 min by car. The route connects Nova Scotia to New Brunswick and falls into a medium-distance route (100–300 km). Plan at least one stop and check fuel before departure.

The trip starts at Lantz (Nova Scotia) — coordinates 44.9894° N, -63.4736° E. The destination is Marysville (New Brunswick), at 45.9340° N, -66.5873° E.

Practical tips for the Lantz – Marysville drive

Terrain along the way

The route starts in Nova Scotia — a province maritime, with Atlantic coves, harbours, and Cape Breton's highlands — and reaches Marysville in New Brunswick, forested and Acadian, with the Bay of Fundy and tidal coastlines. The route also passes near Berwick (Nova Scotia).

When to leave

For a medium-distance trip, leaving before 07:00 or after 10:00 helps you avoid urban congestion. Friday afternoons and Sunday returns often slow the major highways.

Alternatives

For this route of about 299 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Marysville

Full information about Marysville: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Marysville.

Marysville profile →

Explore Lantz

Full information about Lantz: map, GPS coordinates, and all routes from Lantz to other Canadian cities.

Lantz profile →

Related tools

Cities along the Lantz – Marysville route

These cities are near the direct route between Lantz and Marysville. They may be useful as a stopover or alternate destination.

Routes with intermediate stops: Lantz → Berwick · Lantz → Lakeville

Related routes

From Lantz to other cities:

To Marysville from other cities:

From Marysville to intermediate cities:

All info about Lantz →  ·  All info about Marysville →

Popular routes from Nova Scotia

Most-searched routes from Nova Scotia, ranked by popularity.

All cities of Nova Scotia →

Frequently asked questions: Lantz – Marysville

What is the straight-line distance between Lantz and Marysville?

The straight-line distance between Lantz and Marysville is about 264.6 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Lantz to Marysville?

The estimated road distance from Lantz to Marysville is about 299 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Lantz to Marysville?

Indicative drive time from Lantz to Marysville is about 3 h 19 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Lantz to Marysville?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Lantz–Marysville route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Lantz to Marysville?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Lantz to Marysville?

A common alternative is going via Berwick or Lakeville. Use the live planner to compare routes.

Can I open the Lantz–Marysville route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Lantz as origin and Marysville as destination.