Driving route · Canada

Route from Kensington to Fabre

Interactive map, distance, and indicative drive time for the route from Kensington to Fabre — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Kensington (Prince Edward Island) and Fabre (Quebec). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Kensington to Fabre

The straight-line distance between Kensington and Fabre is 1197 km. The estimated road distance by car is around 1353 km, with an indicative drive time of 15 h 2 min.

Straight-line distance 1197 km
Estimated road distance ~1353 km
Indicative drive time 15 h 2 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Kensington – Fabre

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $152–$205

Estimate: ~1353 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Kensington to Fabre

The map shows the locations of Kensington (A) and Fabre (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Kensington to Fabre

Real distance: 1,761.9 km  ·  Estimated time: 23 h 3 min

🗓 Calculated on June 4, 2026
  1. Drive northeast on Old Summerside Road. 69 m
  2. Turn right onto 2/Route 2. 1.8 km
  3. Turn left onto MacIntyre Road/110. 2.2 km
  4. Turn right onto Blue Shank Road/107/110. 127 m
  5. Turn left onto Cairns Road/110. 4.9 km
  6. Turn right onto Freetown Road/8/110. 50 m
  7. Turn left onto Mill Road/110. 2.7 km
  8. Turn left onto Dunk River Road/171. 2.0 km
  9. Turn left onto 1A/Route 1A. 5.7 km
  10. Take the exit toward Borden-Carleton/Confederation Bridge. 47.0 km
  11. Enter the roundabout and take the 1st exit onto NB 15/Route 15. 22 m
  12. Exit the roundabout onto NB 15/Route 15. Continue on NB 15. 59.0 km

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Kensington – Fabre

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~1353 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Kensington

Prince Edward Island · 46.43330, -63.65000

Kensington sits on Prince Edward Island in the central‑west portion of the island. The town functions as a compact inland community anchoring local roads and serving drivers moving between agricultural districts and…

Destination

Fabre

Quebec · 47.20000, -79.36670

Fabre is a small inland community in western Quebec, positioned well inland from the Saint Lawrence corridor and outside any large metropolitan agglomeration. On road maps it appears as a local settlement amid a largely…

How to drive from Kensington to Fabre

The straight-line distance between Kensington (Prince Edward Island) and Fabre (Quebec) is about 1197 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Kensington – Fabre

The route connects Prince Edward Island to Quebec: from Kensington to Fabre you cover roughly 1353 km on the road (geometric distance 1197 km). A long route (over 300 km). Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections. The live planner calculates the optimal route with step-by-step instructions and trip cost.

The trip starts at Kensington (Prince Edward Island) — coordinates 46.4333° N, -63.6500° E. The destination is Fabre (Quebec), at 47.2000° N, -79.3667° E.

Practical tips for the Kensington – Fabre drive

Terrain along the way

The route starts in Prince Edward Island — a province rolling farmland and red-soil coastlines, connected to the mainland by the Confederation Bridge — and reaches Fabre in Quebec, St. Lawrence valley framed by the Laurentians and the Appalachians. The route also passes near Val-Saint-Michel (Quebec).

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 1353 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Fabre

Full information about Fabre: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Fabre.

Fabre profile →

Explore Kensington

Full information about Kensington: map, GPS coordinates, and all routes from Kensington to other Canadian cities.

Kensington profile →

Related tools

Cities along the Kensington – Fabre route

These cities are near the direct route between Kensington and Fabre. They may be useful as a stopover or alternate destination.

Routes with intermediate stops: Kensington → Val-Saint-Michel · Kensington → Saint-Augustin-de-Desmaures · Kensington → Fossambault-sur-le-Lac

Related routes

From Kensington to other cities:

To Fabre from other cities:

From Fabre to intermediate cities:

All info about Kensington →  ·  All info about Fabre →

Popular routes from Prince Edward Island

Most-searched routes from Prince Edward Island, ranked by popularity.

All cities of Prince Edward Island →

Frequently asked questions: Kensington – Fabre

What is the straight-line distance between Kensington and Fabre?

The straight-line distance between Kensington and Fabre is about 1197 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Kensington to Fabre?

The estimated road distance from Kensington to Fabre is about 1353 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Kensington to Fabre?

Indicative drive time from Kensington to Fabre is about 15 h 2 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Kensington to Fabre?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Kensington–Fabre route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Kensington to Fabre?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Kensington to Fabre?

A common alternative is going via Val-Saint-Michel or Saint-Augustin-de-Desmaures. Use the live planner to compare routes.

Can I open the Kensington–Fabre route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Kensington as origin and Fabre as destination.