Driving route · Canada

Route from Armagh to Bath

Interactive map, distance, and indicative drive time for the route from Armagh to Bath — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Armagh (Quebec) and Bath (New Brunswick). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Armagh to Bath

The straight-line distance between Armagh and Bath is 229.9 km. The estimated road distance by car is around 260 km, with an indicative drive time of 2 h 53 min.

Straight-line distance 229.9 km
Estimated road distance ~260 km
Indicative drive time 2 h 53 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Armagh – Bath

Route type Medium

Medium-distance route (100–300 km) — plan a stop and check fuel before departure.

Indicative fuel cost $29–$39

Estimate: ~260 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Armagh to Bath

The map shows the locations of Armagh (A) and Bath (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Armagh to Bath

Real distance: 417.1 km  ·  Estimated time: 5 h 34 min

🗓 Calculated on June 3, 2026
  1. Drive southeast on Rue Saint-Cajetan. 327 m
  2. Turn right onto Route 281 Sud/281. Continue on 281. 20.2 km
  3. Turn right onto 5e Rang/228. Continue on 228. 11.5 km
  4. Turn left onto Montée Saint-François. 1.4 km
  5. Turn left to take the 20 ramp. 135.2 km
  6. Keep right to take 85. 214.3 km
  7. Take exit 115 toward Pert-Andover/Fort Fairfield Me. 772 m
  8. Turn left onto Route 190/NB 190. 458 m
  9. Turn right onto F. Tribe Road/NB 109. 452 m
  10. Turn left onto Route 109/NB 109. 1.2 km
  11. Turn right onto East Riverside Drive/NB 105. Continue on NB 105. 30.8 km

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Armagh – Bath

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~260 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Armagh

Quebec · 46.74250, -70.58750

Armagh is a small inland municipality in southern Quebec, situated within a rural agricultural and mixed-wood landscape. On provincial maps it shows as a compact village that functions as a local waypoint amid dispersed…

Destination

Bath

New Brunswick · 46.51020, -67.59550

Bath is a small rural community in western New Brunswick. On a provincial map it appears as a compact settlement amid a patchwork of farmland and woodland and serves as a local reference point for drivers planning…

How to drive from Armagh to Bath

The straight-line distance between Armagh (Quebec) and Bath (New Brunswick) is about 229.9 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Armagh – Bath

Planning a trip from Armagh to Bath means budgeting around 260 km on the road and an indicative drive time of 2 h 53 min by car. The route connects Quebec to New Brunswick and falls into a medium-distance route (100–300 km). Plan at least one stop and check fuel before departure.

The trip starts at Armagh (Quebec) — coordinates 46.7425° N, -70.5875° E. The destination is Bath (New Brunswick), at 46.5102° N, -67.5955° E.

Practical tips for the Armagh – Bath drive

Terrain along the way

The route starts in Quebec — a province St. Lawrence valley framed by the Laurentians and the Appalachians — and reaches Bath in New Brunswick, forested and Acadian, with the Bay of Fundy and tidal coastlines.

When to leave

For a medium-distance trip, leaving before 07:00 or after 10:00 helps you avoid urban congestion. Friday afternoons and Sunday returns often slow the major highways.

Alternatives

For this route of about 260 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Bath

Full information about Bath: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Bath.

Bath profile →

Explore Armagh

Full information about Armagh: map, GPS coordinates, and all routes from Armagh to other Canadian cities.

Armagh profile →

Related tools

Related routes

From Armagh to other cities:

To Bath from other cities:

All info about Armagh →  ·  All info about Bath →

Popular routes from Quebec

Most-searched routes from Quebec, ranked by popularity.

All cities of Quebec →

Frequently asked questions: Armagh – Bath

What is the straight-line distance between Armagh and Bath?

The straight-line distance between Armagh and Bath is about 229.9 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Armagh to Bath?

The estimated road distance from Armagh to Bath is about 260 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Armagh to Bath?

Indicative drive time from Armagh to Bath is about 2 h 53 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Armagh to Bath?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Armagh–Bath route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Armagh to Bath?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Armagh to Bath?

For alternative routes, use the live planner: pick between highways, secondary roads, and shorter or scenic options.

Can I open the Armagh–Bath route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Armagh as origin and Bath as destination.