Driving route · Canada

Route from Armagh to Sydney Mines

Interactive map, distance, and indicative drive time for the route from Armagh to Sydney Mines — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Armagh (Quebec) and Sydney Mines (Nova Scotia). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Armagh to Sydney Mines

The straight-line distance between Armagh and Sydney Mines is 795.4 km. The estimated road distance by car is around 899 km, with an indicative drive time of 9 h 59 min.

Straight-line distance 795.4 km
Estimated road distance ~899 km
Indicative drive time 9 h 59 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Armagh – Sydney Mines

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $101–$136

Estimate: ~899 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Armagh to Sydney Mines

The map shows the locations of Armagh (A) and Sydney Mines (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Armagh to Sydney Mines

Real distance: 1,202.7 km  ·  Estimated time: 14 h 27 min

🗓 Calculated on June 4, 2026
  1. Drive southeast on Rue Saint-Cajetan. 327 m
  2. Turn right onto Route 281 Sud/281. Continue on 281. 20.2 km
  3. Turn right onto 5e Rang/228. Continue on 228. 11.5 km
  4. Turn left onto Montée Saint-François. 1.4 km
  5. Turn left to take the 20 ramp. 135.2 km
  6. Keep right to take 85/Autoroute Claude-Béchard. 13.4 km
  7. Keep left to stay on 85. 366.4 km
  8. Keep right to take TCH. 234.9 km
  9. Take exit 1A onto LaPlanche Street toward 2/6/Amherst. 487 m
  10. Turn right onto Fort Lawrence Road. 119 m
  11. Turn left onto Highway 2/NS 2. 734 m
  12. Turn left to take the 104 East ramp toward Truro/Halifax. 240.8 km

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Armagh – Sydney Mines

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~899 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Armagh

Quebec · 46.74250, -70.58750

Armagh is a small inland municipality in southern Quebec, situated within a rural agricultural and mixed-wood landscape. On provincial maps it shows as a compact village that functions as a local waypoint amid dispersed…

Destination

Sydney Mines

Nova Scotia · 46.23330, -60.21670

Sydney Mines sits on Cape Breton Island in northeastern Nova Scotia, positioned on the north shore of the harbour that fronts the larger Sydney urban area. As part of the Cape Breton regional urban pattern it functions…

How to drive from Armagh to Sydney Mines

The straight-line distance between Armagh (Quebec) and Sydney Mines (Nova Scotia) is about 795.4 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Armagh – Sydney Mines

Planning a trip from Armagh to Sydney Mines means budgeting around 899 km on the road and an indicative drive time of 9 h 59 min by car. The route connects Quebec to Nova Scotia and falls into a long route (over 300 km). Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections.

The trip starts at Armagh (Quebec) — coordinates 46.7425° N, -70.5875° E. The destination is Sydney Mines (Nova Scotia), at 46.2333° N, -60.2167° E.

Practical tips for the Armagh – Sydney Mines drive

Terrain along the way

The route starts in Quebec — a province St. Lawrence valley framed by the Laurentians and the Appalachians — and reaches Sydney Mines in Nova Scotia, maritime, with Atlantic coves, harbours, and Cape Breton's highlands. The route also passes near Saint-Louis de Kent (New Brunswick).

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 899 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Sydney Mines

Full information about Sydney Mines: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Sydney Mines.

Sydney Mines profile →

Explore Armagh

Full information about Armagh: map, GPS coordinates, and all routes from Armagh to other Canadian cities.

Armagh profile →

Related tools

Cities along the Armagh – Sydney Mines route

These cities are near the direct route between Armagh and Sydney Mines. They may be useful as a stopover or alternate destination.

Routes with intermediate stops: Armagh → Saint-Louis de Kent · Armagh → Saint-Antoine · Armagh → South Nelson

Related routes

From Armagh to other cities:

To Sydney Mines from other cities:

From Sydney Mines to intermediate cities:

All info about Armagh →  ·  All info about Sydney Mines →

Popular routes from Quebec

Most-searched routes from Quebec, ranked by popularity.

All cities of Quebec →

Frequently asked questions: Armagh – Sydney Mines

What is the straight-line distance between Armagh and Sydney Mines?

The straight-line distance between Armagh and Sydney Mines is about 795.4 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Armagh to Sydney Mines?

The estimated road distance from Armagh to Sydney Mines is about 899 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Armagh to Sydney Mines?

Indicative drive time from Armagh to Sydney Mines is about 9 h 59 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Armagh to Sydney Mines?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Armagh–Sydney Mines route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Armagh to Sydney Mines?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Armagh to Sydney Mines?

A common alternative is going via Saint-Louis de Kent or Saint-Antoine. Use the live planner to compare routes.

Can I open the Armagh–Sydney Mines route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Armagh as origin and Sydney Mines as destination.