Driving route · Canada

Route from Arthabaska to Fabre

Interactive map, distance, and indicative drive time for the route from Arthabaska to Fabre — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Arthabaska (Quebec) and Fabre (Quebec). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Arthabaska to Fabre

The straight-line distance between Arthabaska and Fabre is 583.1 km. The estimated road distance by car is around 659 km, with an indicative drive time of 7 h 19 min.

Straight-line distance 583.1 km
Estimated road distance ~659 km
Indicative drive time 7 h 19 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Arthabaska – Fabre

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $74–$100

Estimate: ~659 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Arthabaska to Fabre

The map shows the locations of Arthabaska (A) and Fabre (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Arthabaska to Fabre

Real distance: 819.7 km  ·  Estimated time: 11 h 43 min

🗓 Calculated on June 3, 2026
  1. Drive southwest on Rue de la Manufacture. 154 m
  2. Turn right onto Rue du Curé-Suzor. 342 m
  3. Turn left onto Boulevard des Bois-Francs Sud. 332 m
  4. Turn right onto Rue Laurier Ouest. 923 m
  5. Turn right onto Avenue Pie-X/161. Continue on 161. 1.9 km
  6. Turn left onto Route 116/116. Continue on 116. 10.5 km
  7. Turn right onto Route Saint-Albert. 9.2 km
  8. Turn right onto Rue Principale. 855 m
  9. Turn left onto Ancienne autoroute 955. 55.7 km
  10. Keep right to take 40/Autoroute Félix-Leclerc toward Montréal/Boulevard des Forges. 55.2 km
  11. Take exit 144 onto 158 toward Berthierville/Saint-Gabriel. 429 m
  12. Turn right onto Avenue Gilles-Villeneuve/158. Continue on 158. 4.8 km

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Arthabaska – Fabre

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~659 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Arthabaska

Quebec · 46.04380, -71.91620

Arthabaska sits in southern Quebec as an inland locality roughly midway between smaller towns and larger regional centres. On maps it appears within a mixed agricultural and forested landscape where provincial routes…

Destination

Fabre

Quebec · 47.20000, -79.36670

Fabre is a small inland community in western Quebec, positioned well inland from the Saint Lawrence corridor and outside any large metropolitan agglomeration. On road maps it appears as a local settlement amid a largely…

How to drive from Arthabaska to Fabre

The straight-line distance between Arthabaska (Quebec) and Fabre (Quebec) is about 583.1 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Arthabaska – Fabre

Planning a trip from Arthabaska to Fabre means budgeting around 659 km on the road and an indicative drive time of 7 h 19 min by car. The route stays within Quebec and falls into a long route (over 300 km). Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections.

Practical tips for the Arthabaska – Fabre drive

Terrain along the way

The route stays within Quebec, St. Lawrence valley framed by the Laurentians and the Appalachians.

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 659 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Fabre

Full information about Fabre: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Fabre.

Fabre profile →

Explore Arthabaska

Full information about Arthabaska: map, GPS coordinates, and all routes from Arthabaska to other Canadian cities.

Arthabaska profile →

Related tools

Cities along the Arthabaska – Fabre route

These cities are near the direct route between Arthabaska and Fabre. They may be useful as a stopover or alternate destination.

Routes with intermediate stops: Arthabaska → Saint-Jean-sur-le-Lac · Arthabaska → Mont-Laurier · Arthabaska → Maniwaki

Related routes

From Arthabaska to other cities:

To Fabre from other cities:

From Fabre to intermediate cities:

All info about Arthabaska →  ·  All info about Fabre →

Popular routes from Quebec

Most-searched routes from Quebec, ranked by popularity.

All cities of Quebec →

Frequently asked questions: Arthabaska – Fabre

What is the straight-line distance between Arthabaska and Fabre?

The straight-line distance between Arthabaska and Fabre is about 583.1 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Arthabaska to Fabre?

The estimated road distance from Arthabaska to Fabre is about 659 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Arthabaska to Fabre?

Indicative drive time from Arthabaska to Fabre is about 7 h 19 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Arthabaska to Fabre?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Arthabaska–Fabre route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Arthabaska to Fabre?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Arthabaska to Fabre?

A common alternative is going via Saint-Jean-sur-le-Lac or Mont-Laurier. Use the live planner to compare routes.

Can I open the Arthabaska–Fabre route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Arthabaska as origin and Fabre as destination.