Driving route · Canada

Route from Saint-Sauveur to Garson Mine

Interactive map, distance, and indicative drive time for the route from Saint-Sauveur to Garson Mine — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Saint-Sauveur (Quebec) and Garson Mine (Ontario). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Saint-Sauveur to Garson Mine

The straight-line distance between Saint-Sauveur and Garson Mine is 520.2 km. The estimated road distance by car is around 588 km, with an indicative drive time of 6 h 32 min.

Straight-line distance 520.2 km
Estimated road distance ~588 km
Indicative drive time 6 h 32 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Saint-Sauveur – Garson Mine

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $66–$89

Estimate: ~588 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Saint-Sauveur to Garson Mine

The map shows the locations of Saint-Sauveur (A) and Garson Mine (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Saint-Sauveur to Garson Mine

Real distance: 660.0 km  ·  Estimated time: 9 h 32 min

🗓 Calculated on June 4, 2026
  1. Drive north on Chemin Bellevue. 449 m
  2. Bear right onto Chemin des Résidences-Saint-Sauveur-en-Haut. 561 m
  3. Turn left onto Avenue de l'Église. 37.5 km
  4. Turn right onto Route Principale/148/158/329. 885 m
  5. Turn left onto Chemin Félix-Touchette/329. 3.4 km
  6. Turn right onto Chemin Bethany/329. 2.4 km
  7. Turn right to take the 50 ramp. 20.6 km
  8. Keep right to take exit 239 onto 344 Est/148 toward Grenville/Hawkesbury. 542 m
  9. Turn left onto Chemin Scotch/344. 5.2 km
  10. Turn right onto Du Chenail Boulevard/Boulevard du Chenail. 17.3 km
  11. Take the 417 Ouest ramp toward Ottawa. 386.3 km
  12. Enter the roundabout and take the 2nd exit onto 17/McConnell Street/Rue McConnell. 44 m

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Saint-Sauveur – Garson Mine

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~588 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Saint-Sauveur

Quebec · 45.90000, -74.17000

Saint-Sauveur sits in southwestern Quebec’s Laurentian foothills, north of Montreal. It appears on provincial maps as a compact town amid a cluster of small municipalities and rural landscapes, where regional roads and…

Destination

Garson Mine

Ontario · 46.56670, -80.86670

Garson Mine sits in northeastern Ontario on the rocky, lake‑dotted Canadian Shield just east of the Greater Sudbury area. On provincial maps it appears as a small resource‑area locality that drivers reference when…

How to drive from Saint-Sauveur to Garson Mine

The straight-line distance between Saint-Sauveur (Quebec) and Garson Mine (Ontario) is about 520.2 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Saint-Sauveur – Garson Mine

The journey from Saint-Sauveur to Garson Mine covers roughly 588 km on the road, equal to 520.2 km straight line. The trip connects Quebec to Ontario and is classified as a long route (over 300 km). Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections. Open the interactive planner for the route map, turns, and a fuel-or-EV cost calculator.

The trip starts at Saint-Sauveur (Quebec) — coordinates 45.9000° N, -74.1700° E. The destination is Garson Mine (Ontario), at 46.5667° N, -80.8667° E.

Practical tips for the Saint-Sauveur – Garson Mine drive

Terrain along the way

The route starts in Quebec — a province St. Lawrence valley framed by the Laurentians and the Appalachians — and reaches Garson Mine in Ontario, Great Lakes shoreline in the south, Canadian Shield forests across the north. The route also passes near Petawawa (Ontario).

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 588 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Garson Mine

Full information about Garson Mine: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Garson Mine.

Garson Mine profile →

Explore Saint-Sauveur

Full information about Saint-Sauveur: map, GPS coordinates, and all routes from Saint-Sauveur to other Canadian cities.

Saint-Sauveur profile →

Related tools

Cities along the Saint-Sauveur – Garson Mine route

These cities are near the direct route between Saint-Sauveur and Garson Mine. They may be useful as a stopover or alternate destination.

Routes with intermediate stops: Saint-Sauveur → Petawawa · Saint-Sauveur → Pembroke · Saint-Sauveur → Fort-Coulonge

Related routes

From Saint-Sauveur to other cities:

To Garson Mine from other cities:

From Garson Mine to intermediate cities:

All info about Saint-Sauveur →  ·  All info about Garson Mine →

Popular routes from Quebec

Most-searched routes from Quebec, ranked by popularity.

All cities of Quebec →

Frequently asked questions: Saint-Sauveur – Garson Mine

What is the straight-line distance between Saint-Sauveur and Garson Mine?

The straight-line distance between Saint-Sauveur and Garson Mine is about 520.2 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Saint-Sauveur to Garson Mine?

The estimated road distance from Saint-Sauveur to Garson Mine is about 588 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Saint-Sauveur to Garson Mine?

Indicative drive time from Saint-Sauveur to Garson Mine is about 6 h 32 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Saint-Sauveur to Garson Mine?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Saint-Sauveur–Garson Mine route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Saint-Sauveur to Garson Mine?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Saint-Sauveur to Garson Mine?

A common alternative is going via Petawawa or Pembroke. Use the live planner to compare routes.

Can I open the Saint-Sauveur–Garson Mine route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Saint-Sauveur as origin and Garson Mine as destination.