Driving route · Canada

Route from Raymore to Benalto

Interactive map, distance, and indicative drive time for the route from Raymore to Benalto — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Raymore (Saskatchewan) and Benalto (Alberta). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Raymore to Benalto

The straight-line distance between Raymore and Benalto is 695.3 km. The estimated road distance by car is around 786 km, with an indicative drive time of 8 h 44 min.

Straight-line distance 695.3 km
Estimated road distance ~786 km
Indicative drive time 8 h 44 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Raymore – Benalto

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $88–$119

Estimate: ~786 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Raymore to Benalto

The map shows the locations of Raymore (A) and Benalto (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Estimate trip cost: Raymore – Benalto

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~786 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Raymore

Saskatchewan · 51.24200, -104.31400

Raymore sits in east-central Saskatchewan on the prairie and functions primarily as a small rural town marking connections among surrounding farms and nearby communities. It is not part of a metropolitan area but…

Destination

Benalto

Alberta · 52.30860, -114.28000

Benalto sits in central Alberta, a small rural community located in the Red Deer region on the province's prairie–aspen parkland fringe. For drivers consulting a map, it represents a local waypoint for short-range…

How to drive from Raymore to Benalto

The straight-line distance between Raymore (Saskatchewan) and Benalto (Alberta) is about 695.3 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Raymore – Benalto

The distance from Raymore to Benalto is estimated at 786 km on a mixed road profile, starting from 695.3 km straight line. It is a long route (over 300 km) that connects Saskatchewan to Alberta. Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections. Calculate the current route with the live planner for detailed instructions.

The trip starts at Raymore (Saskatchewan) — coordinates 51.2420° N, -104.3140° E. The destination is Benalto (Alberta), at 52.3086° N, -114.2800° E.

Practical tips for the Raymore – Benalto drive

Terrain along the way

The route starts in Saskatchewan — a province prairie to the south and boreal forest, lakes, and Shield country to the north — and reaches Benalto in Alberta, prairie in the south rising into the Canadian Rockies in the west. The route also passes near Plenty (Saskatchewan).

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 786 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Benalto

Full information about Benalto: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Benalto.

Benalto profile →

Explore Raymore

Full information about Raymore: map, GPS coordinates, and all routes from Raymore to other Canadian cities.

Raymore profile →

Related tools

Cities along the Raymore – Benalto route

These cities are near the direct route between Raymore and Benalto. They may be useful as a stopover or alternate destination.

Routes with intermediate stops: Raymore → Plenty · Raymore → Luseland · Raymore → Kindersley

Related routes

From Raymore to other cities:

To Benalto from other cities:

From Benalto to intermediate cities:

All info about Raymore →  ·  All info about Benalto →

Popular routes from Saskatchewan

Most-searched routes from Saskatchewan, ranked by popularity.

All cities of Saskatchewan →

Frequently asked questions: Raymore – Benalto

What is the straight-line distance between Raymore and Benalto?

The straight-line distance between Raymore and Benalto is about 695.3 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Raymore to Benalto?

The estimated road distance from Raymore to Benalto is about 786 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Raymore to Benalto?

Indicative drive time from Raymore to Benalto is about 8 h 44 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Raymore to Benalto?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Raymore–Benalto route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Raymore to Benalto?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Raymore to Benalto?

A common alternative is going via Plenty or Luseland. Use the live planner to compare routes.

Can I open the Raymore–Benalto route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Raymore as origin and Benalto as destination.