Driving route · Canada

Route from Marysville to Upton

Interactive map, distance, and indicative drive time for the route from Marysville to Upton — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Marysville (New Brunswick) and Upton (Quebec). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Marysville to Upton

The straight-line distance between Marysville and Upton is 473.6 km. The estimated road distance by car is around 535 km, with an indicative drive time of 5 h 57 min.

Straight-line distance 473.6 km
Estimated road distance ~535 km
Indicative drive time 5 h 57 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Marysville – Upton

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $60–$81

Estimate: ~535 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Marysville to Upton

The map shows the locations of Marysville (A) and Upton (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Marysville to Upton

Real distance: 753.9 km  ·  Estimated time: 9 h 42 min

🗓 Calculated on June 4, 2026
  1. Drive northwest on Shallon Lane. 1.1 km
  2. Turn right onto Rockwood Way. 1.8 km
  3. Turn left onto Richibucto Road/NB 10. Continue on NB 10. 684 m
  4. Turn left onto NB 8/Barker's Point Bypass. 1.9 km
  5. Turn left onto NB 105/NB 8/Promenade Riverside Drive/Riverside Drive/Promenade Riverside. 66 m
  6. Take the 8 ramp toward 2/7/Edmundston/Moncton. 4.9 km
  7. Enter the roundabout and take the 2nd exit onto NB 8/Fredericton Bypass. 325.1 km
  8. Keep left to take 85. 52.6 km
  9. Keep left to take 85/Autoroute Claude-Béchard. 191.3 km
  10. Keep left to stay on 20 toward Montréal. 157.1 km
  11. Take exit 157 toward Saint-Nazaire-d'Acton/Saint-Théodore-d'Acton/Wickham. 891 m
  12. Turn left onto Rang Brodeur. 2.9 km

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Marysville – Upton

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~535 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Marysville

New Brunswick · 45.93400, -66.58730

Marysville lies in central New Brunswick amid a mixed forest and agricultural landscape. On provincial maps it appears as a compact settlement that functions primarily as a local waypoint for drivers moving between…

Destination

Upton

Quebec · 45.65000, -72.68330

Upton is a small inland town in southern Quebec positioned at latitude 45.65, longitude -72.6833. On regional maps it appears as a compact local centre serving surrounding agricultural and rural communities, where local…

How to drive from Marysville to Upton

The straight-line distance between Marysville (New Brunswick) and Upton (Quebec) is about 473.6 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Marysville – Upton

How far is Marysville from Upton? The road estimate is around 535 km, with an indicative drive time of 5 h 57 min. The route connects New Brunswick to Quebec — a long route (over 300 km). Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections. Verify the track with the live planner for current instructions.

The trip starts at Marysville (New Brunswick) — coordinates 45.9340° N, -66.5873° E. The destination is Upton (Quebec), at 45.6500° N, -72.6833° E.

Practical tips for the Marysville – Upton drive

Terrain along the way

The route starts in New Brunswick — a province forested and Acadian, with the Bay of Fundy and tidal coastlines — and reaches Upton in Quebec, St. Lawrence valley framed by the Laurentians and the Appalachians.

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 535 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Upton

Full information about Upton: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Upton.

Upton profile →

Explore Marysville

Full information about Marysville: map, GPS coordinates, and all routes from Marysville to other Canadian cities.

Marysville profile →

Related tools

Related routes

From Marysville to other cities:

To Upton from other cities:

All info about Marysville →  ·  All info about Upton →

Popular routes from New Brunswick

Most-searched routes from New Brunswick, ranked by popularity.

All cities of New Brunswick →

Frequently asked questions: Marysville – Upton

What is the straight-line distance between Marysville and Upton?

The straight-line distance between Marysville and Upton is about 473.6 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Marysville to Upton?

The estimated road distance from Marysville to Upton is about 535 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Marysville to Upton?

Indicative drive time from Marysville to Upton is about 5 h 57 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Marysville to Upton?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Marysville–Upton route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Marysville to Upton?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Marysville to Upton?

For alternative routes, use the live planner: pick between highways, secondary roads, and shorter or scenic options.

Can I open the Marysville–Upton route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Marysville as origin and Upton as destination.