Driving route · Canada

Route from Upton to Marysville

Interactive map, distance, and indicative drive time for the route from Upton to Marysville — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Upton (Quebec) and Marysville (New Brunswick). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Upton to Marysville

The straight-line distance between Upton and Marysville is 473.6 km. The estimated road distance by car is around 535 km, with an indicative drive time of 5 h 57 min.

Straight-line distance 473.6 km
Estimated road distance ~535 km
Indicative drive time 5 h 57 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Upton – Marysville

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $60–$81

Estimate: ~535 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Upton to Marysville

The map shows the locations of Upton (A) and Marysville (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Upton to Marysville

Real distance: 754.6 km  ·  Estimated time: 9 h 54 min

🗓 Calculated on June 4, 2026
  1. Drive east on Rue Phaneuf. 11 m
  2. Turn right onto Rue du Notaire. 99 m
  3. Turn right onto Rue Principale/116. 794 m
  4. Turn right onto Rue Saint-Éphrem. 12.1 km
  5. Turn left onto Rang Brodeur. 2.4 km
  6. Turn left to take the 20 ramp. 342.1 km
  7. Keep right to take 85. 379.8 km
  8. Keep left to take NB 8 toward Fredericton/Miramichi. 5.9 km
  9. Enter the roundabout and take the 2nd exit onto NB 8/Fredericton Bypass. 3.3 km
  10. Keep left to stay on NB 8 toward 105. 1.4 km
  11. Take exit 10 onto 8/105 North toward 10/Fredericton North/Miramichi/Minto. 204 m
  12. Bear right onto NB 105/NB 8/Promenade Riverside Drive/Riverside Drive/Promenade Riverside. Continue on NB 8. 293 m

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Upton – Marysville

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~535 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Upton

Quebec · 45.65000, -72.68330

Upton is a small inland town in southern Quebec positioned at latitude 45.65, longitude -72.6833. On regional maps it appears as a compact local centre serving surrounding agricultural and rural communities, where local…

Destination

Marysville

New Brunswick · 45.93400, -66.58730

Marysville lies in central New Brunswick amid a mixed forest and agricultural landscape. On provincial maps it appears as a compact settlement that functions primarily as a local waypoint for drivers moving between…

How to drive from Upton to Marysville

The straight-line distance between Upton (Quebec) and Marysville (New Brunswick) is about 473.6 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Upton – Marysville

The distance from Upton to Marysville is estimated at 535 km on a mixed road profile, starting from 473.6 km straight line. It is a long route (over 300 km) that connects Quebec to New Brunswick. Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections. Calculate the current route with the live planner for detailed instructions.

The trip starts at Upton (Quebec) — coordinates 45.6500° N, -72.6833° E. The destination is Marysville (New Brunswick), at 45.9340° N, -66.5873° E.

Practical tips for the Upton – Marysville drive

Terrain along the way

The route starts in Quebec — a province St. Lawrence valley framed by the Laurentians and the Appalachians — and reaches Marysville in New Brunswick, forested and Acadian, with the Bay of Fundy and tidal coastlines.

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 535 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Marysville

Full information about Marysville: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Marysville.

Marysville profile →

Explore Upton

Full information about Upton: map, GPS coordinates, and all routes from Upton to other Canadian cities.

Upton profile →

Related tools

Related routes

From Upton to other cities:

To Marysville from other cities:

All info about Upton →  ·  All info about Marysville →

Popular routes from Quebec

Most-searched routes from Quebec, ranked by popularity.

All cities of Quebec →

Frequently asked questions: Upton – Marysville

What is the straight-line distance between Upton and Marysville?

The straight-line distance between Upton and Marysville is about 473.6 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Upton to Marysville?

The estimated road distance from Upton to Marysville is about 535 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Upton to Marysville?

Indicative drive time from Upton to Marysville is about 5 h 57 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Upton to Marysville?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Upton–Marysville route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Upton to Marysville?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Upton to Marysville?

For alternative routes, use the live planner: pick between highways, secondary roads, and shorter or scenic options.

Can I open the Upton–Marysville route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Upton as origin and Marysville as destination.