Driving route · Canada

Route from Bath to Port Burwell

Interactive map, distance, and indicative drive time for the route from Bath to Port Burwell — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Bath (Ontario) and Port Burwell (Ontario). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Bath to Port Burwell

The straight-line distance between Bath and Port Burwell is 367.1 km. The estimated road distance by car is around 415 km, with an indicative drive time of 4 h 37 min.

Straight-line distance 367.1 km
Estimated road distance ~415 km
Indicative drive time 4 h 37 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Bath – Port Burwell

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $47–$63

Estimate: ~415 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Bath to Port Burwell

The map shows the locations of Bath (A) and Port Burwell (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Bath to Port Burwell

Real distance: 446.7 km  ·  Estimated time: 7 h 1 min

🗓 Calculated on June 4, 2026
  1. Drive southwest on Main Street Bath/33. 26 m
  2. Turn right onto Church Street/CR 7. Continue on CR 7. 7.5 km
  3. Turn left onto County Road 2/CR 2. Continue on CR 2. 11.3 km
  4. Turn right onto Centre Street North/CR 41. Continue on CR 41. 2.4 km
  5. Turn left to take the Highway 401 ramp. 150.8 km
  6. Take exit 426 onto 418 North toward 407 Toll. 10.4 km
  7. Keep left to take 407 West toward Toronto. 101.3 km
  8. Take exit 34 onto 401 West toward London. 114.7 km
  9. Take exit 216 onto 10 toward Ingersoll. 542 m
  10. Turn left onto Culloden Line/10. 28.9 km
  11. Turn right onto Heritage Line/38. 1.2 km
  12. Turn left onto Richmond Road/43. 10.7 km

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Bath – Port Burwell

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~415 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Bath

Ontario · 44.18290, -76.77540

Bath is a small lakeside community in southeastern Ontario on the northern shore of a sheltered inlet of eastern Lake Ontario. With a population of about 1,825, it appears on maps as a compact village clustered close to…

Destination

Port Burwell

Ontario · 42.64760, -80.79990

Port Burwell sits on the north shore of Lake Erie in southern Ontario. The community appears on provincial maps as a lakeside settlement along the Erie shoreline and functions primarily as a local waypoint for drivers…

How to drive from Bath to Port Burwell

The straight-line distance between Bath (Ontario) and Port Burwell (Ontario) is about 367.1 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Bath – Port Burwell

Planning a trip from Bath to Port Burwell means budgeting around 415 km on the road and an indicative drive time of 4 h 37 min by car. The route stays within Ontario and falls into a long route (over 300 km). Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections.

Practical tips for the Bath – Port Burwell drive

Terrain along the way

The route stays within Ontario, Great Lakes shoreline in the south, Canadian Shield forests across the north.

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 415 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Port Burwell

Full information about Port Burwell: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Port Burwell.

Port Burwell profile →

Explore Bath

Full information about Bath: map, GPS coordinates, and all routes from Bath to other Canadian cities.

Bath profile →

Related tools

Cities along the Bath – Port Burwell route

These cities are near the direct route between Bath and Port Burwell. They may be useful as a stopover or alternate destination.

Routes with intermediate stops: Bath → Niagara-on-the-Lake · Bath → Stamford · Bath → Port Weller

Related routes

From Bath to other cities:

To Port Burwell from other cities:

From Port Burwell to intermediate cities:

All info about Bath →  ·  All info about Port Burwell →

Popular routes from Ontario

Most-searched routes from Ontario, ranked by popularity.

All cities of Ontario →

Frequently asked questions: Bath – Port Burwell

What is the straight-line distance between Bath and Port Burwell?

The straight-line distance between Bath and Port Burwell is about 367.1 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Bath to Port Burwell?

The estimated road distance from Bath to Port Burwell is about 415 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Bath to Port Burwell?

Indicative drive time from Bath to Port Burwell is about 4 h 37 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Bath to Port Burwell?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Bath–Port Burwell route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Bath to Port Burwell?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Bath to Port Burwell?

A common alternative is going via Niagara-on-the-Lake or Stamford. Use the live planner to compare routes.

Can I open the Bath–Port Burwell route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Bath as origin and Port Burwell as destination.