Driving route · Canada

Route from Port Burwell to Bath

Interactive map, distance, and indicative drive time for the route from Port Burwell to Bath — with the live planner for up-to-date turn-by-turn directions.

This page provides the map and indicative distance data for the route between Port Burwell (Ontario) and Bath (Ontario). Use the live planner below to get up-to-date driving directions by car, on foot, or by bicycle.

Distance from Port Burwell to Bath

The straight-line distance between Port Burwell and Bath is 367.1 km. The estimated road distance by car is around 415 km, with an indicative drive time of 4 h 37 min.

Straight-line distance 367.1 km
Estimated road distance ~415 km
Indicative drive time 4 h 37 min
Note: values are approximate estimates. Road distance is calculated by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). Drive time assumes ~90 km/h average. Real traffic, tolls, and conditions can vary significantly. Use the live planner for current data.

Trip cost and route type: Port Burwell – Bath

Route type Long

Long route (over 300 km) — plan a break roughly every 2 hours and check highway traffic and weather.

Indicative fuel cost $47–$63

Estimate: ~415 km, 8 L/100 km, $1.65/L. ±15%. Excludes tolls.

Driving directions from Port Burwell to Bath

The map shows the locations of Port Burwell (A) and Bath (B). Use the form below to calculate the up-to-date road route with turn-by-turn directions, real distance, and estimated drive time.

Avoid:

Prefer another app? Open in Google Maps ↗

Driving directions from Port Burwell to Bath

Real distance: 446.5 km  ·  Estimated time: 7 h 3 min

🗓 Calculated on June 4, 2026
  1. Drive south on Victoria Street/50. 102 m
  2. Turn right onto Wellington Street/142. 520 m
  3. Turn right onto Robinson Street. 202 m
  4. Turn left onto Bridge Street/42. Continue on 42. 5.8 km
  5. Turn right onto Richmond Road/43. 10.7 km
  6. Turn right onto Heritage Line/38. 1.2 km
  7. Turn left onto Culloden Road/46. 28.3 km
  8. Turn left to take the ramp toward Toronto. 18.8 km
  9. Keep left to stay on 401/Highway 401/Macdonald-Cartier Freeway. 89.9 km
  10. Keep left to stay on 401/Macdonald-Cartier Freeway. 5.9 km
  11. Take exit 330B onto 407 ETR East. 100.9 km
  12. Take exit 135 onto 418 South toward 401. 9.9 km

Standard car route without avoiding highways. For advanced options (motorcycle, bicycle, transit, avoid tolls) use the live planner above.

Estimate trip cost: Port Burwell – Bath

Litres estimated
Fuel cost
Toll estimate
Total estimate
Range ±15%

Indicative estimates based on ~415 km. Tolls calculated at ~$0.10/km on tolled segments. The calculator updates with the live planner's real distance. Actual consumption, driving style, weather, and toll rates vary.

Origin and destination

Origin

Port Burwell

Ontario · 42.64760, -80.79990

Port Burwell sits on the north shore of Lake Erie in southern Ontario. The community appears on provincial maps as a lakeside settlement along the Erie shoreline and functions primarily as a local waypoint for drivers…

Destination

Bath

Ontario · 44.18290, -76.77540

Bath is a small lakeside community in southeastern Ontario on the northern shore of a sheltered inlet of eastern Lake Ontario. With a population of about 1,825, it appears on maps as a compact village clustered close to…

How to drive from Port Burwell to Bath

The straight-line distance between Port Burwell (Ontario) and Bath (Ontario) is about 367.1 km. The actual road distance varies by chosen route, road type, and travel conditions — especially in winter and across mountain or northern segments.

Before you leave, consider:

  • Check current traffic with a navigation app — particularly around major cities.
  • Look up any toll segments on your route (Ontario 407, select bridges).
  • In winter or at higher elevations, drive times and conditions can change quickly. Carry a charged phone, fuel reserve, and weather-appropriate gear.
  • Plan stops at service centres or towns along the way — fuel and rest stops can be sparse on remote sections.

Route description: Port Burwell – Bath

The route stays within Ontario: from Port Burwell to Bath you cover roughly 415 km on the road (geometric distance 367.1 km). A long route (over 300 km). Plan multiple breaks and check highway traffic, weather, and fuel availability — particularly in remote sections. The live planner calculates the optimal route with step-by-step instructions and trip cost.

Practical tips for the Port Burwell – Bath drive

Terrain along the way

The route stays within Ontario, Great Lakes shoreline in the south, Canadian Shield forests across the north.

When to leave

For a long route, leave early (before 06:30) or wait until after 10:00. Avoid summer long-weekend exoduses and major holidays. Plan a break every 1.5–2 hours of driving — and check weather, especially across the Prairies and through mountain passes.

Alternatives

For this route of about 415 km, consider VIA Rail Canada — VIA's Corridor service connects many Eastern Canadian cities, and the long-distance trains (the Canadian, Ocean) run through the Prairies and the Maritimes. Cross-border trips may also include Amtrak's Adirondack or Cascades. Check schedules at viarail.ca and amtrak.com.

Explore Bath

Full information about Bath: interactive map, GPS coordinates, elevation, nearby cities, and routes to and from Bath.

Bath profile →

Explore Port Burwell

Full information about Port Burwell: map, GPS coordinates, and all routes from Port Burwell to other Canadian cities.

Port Burwell profile →

Related tools

Cities along the Port Burwell – Bath route

These cities are near the direct route between Port Burwell and Bath. They may be useful as a stopover or alternate destination.

Routes with intermediate stops: Port Burwell → Niagara-on-the-Lake · Port Burwell → Stamford · Port Burwell → Port Weller

Related routes

From Port Burwell to other cities:

To Bath from other cities:

From Bath to intermediate cities:

All info about Port Burwell →  ·  All info about Bath →

Popular routes from Ontario

Most-searched routes from Ontario, ranked by popularity.

All cities of Ontario →

Frequently asked questions: Port Burwell – Bath

What is the straight-line distance between Port Burwell and Bath?

The straight-line distance between Port Burwell and Bath is about 367.1 km. This is the direct geometric distance between the two coordinates, ignoring road geometry.

What is the estimated road distance from Port Burwell to Bath?

The estimated road distance from Port Burwell to Bath is about 415 km — derived by multiplying the straight-line distance by a road-deviation factor (1.13–1.30 based on length). For an up-to-date route, use the live planner.

How long does it take to drive from Port Burwell to Bath?

Indicative drive time from Port Burwell to Bath is about 4 h 37 min, based on an average highway speed of 90 km/h on a mixed motorway/highway profile. Real time depends on traffic, weather, stops, vehicle type, and conditions.

How do I get up-to-date driving directions from Port Burwell to Bath?

Use the live planner on this page: select your transport mode and click "Update route". You'll see the route with turn-by-turn directions, current distance, and estimated time based on up-to-date routing data.

Does the Port Burwell–Bath route involve highway tolls?

CanadaDrivingDirections.com does not provide toll details. Toll roads are limited in Canada — Ontario's 407 ETR, a few Quebec bridges, and the Confederation Bridge to PEI are the main ones. Check the operator's site for current pricing.

How does traffic affect the route from Port Burwell to Bath?

Traffic varies by time of day, season, and weather. The live planner uses up-to-date routing data; for live traffic, use a navigation app before departure — especially in winter when conditions can change rapidly.

Is there an alternative route from Port Burwell to Bath?

A common alternative is going via Niagara-on-the-Lake or Stamford. Use the live planner to compare routes.

Can I open the Port Burwell–Bath route in Google Maps?

Yes. Click "Open in Google Maps" on this page to view the route in the Google Maps app or browser. You can also open Google Maps directly and enter Port Burwell as origin and Bath as destination.